The Motobike Mas 70/100-19 front wheel motorcycle mousse insert is a nitrile rubber foam tire insert for youth MX, pit bikes, and dirt bike front wheels. Available in soft, medium, and standard density. Eliminates front pinch flats, reduces rotating mass. Factory direct B2B wholesale from Tianjin, China.
| 1.1 Bar | Prestazioni ottimali in termini di velocità |
|---|---|
| 0,8 Bar | Ideale per i deserti, le praterie e i terreni del Gobi |
| 0,5 Bar | Ottimale per i sentieri forestali |
| 0,3 Bar | Mousse da enduro estremo per il fuoristrada tecnico |
The Motobike Mas 70/100-19 front wheel motorcycle mousse insert is a professional-grade closed-cell nitrile rubber foam tire insert engineered for the front wheels of motocross bikes, pit bikes, youth dirt bikes, and lightweight off-road motorcycles. This front-specific mousse completely replaces the inner tube to eliminate pinch flats on the front end, reduce unsprung rotating mass, and deliver consistent steering precision through every corner.
Available in soft, medium, and standard density formulations, the 70/100-19 front mousse fits smaller-displacement and youth-oriented motorcycles with 19-inch front wheels. As a Tianjin, China-based B2B manufacturer, Motobike Mas offers OEM private labeling, custom hardness formulations, and direct factory wholesale pricing for dealers, distributors, and race teams worldwide.
| Dimensione | 70/100-19 |
| Montaggio | 70/100-19 front tires (youth MX, pit bike, lightweight off-road) |
| Materiale | Schiuma di gomma nitrilica a cellule chiuse |
| Opzioni di densità | Morbido, medio, standard |
| Peso | Approx. 0.9-1.1 kg |
| Riduzione della massa rotante | Fino a 40% rispetto al tubo + blocco del cerchio per impieghi gravosi |
| Pressione effettiva equivalente | 8-12 psi |
| Vita utile | 200-500 miglia da corsa tipiche |
| Paese di origine | Tianjin, Cina |
A front tire flat at speed is significantly more dangerous than a rear flat — it causes immediate loss of steering control. The 70/100-19 front mousse insert eliminates this risk entirely. No pinch flats from square-edge landings, no puncture flats from rocks and thorns, and no valve stem failures. For racers on youth bikes and pit bikes, this means safer racing and no DNFs from front-end failures.
Reducing unsprung rotating mass on the front wheel dramatically improves steering response and suspension action. By eliminating the inner tube and allowing a lighter rim lock, the 70/100-19 front mousse reduces front wheel rotating mass by up to 40%. The result: lighter steering feel, reduced deflection off roots and rocks, and better front-end feedback to the rider.
Unlike pneumatic tires where front tire pressure changes with temperature and altitude, a mousse insert delivers consistent damping and steering characteristics from the first lap to the last. This predictability is especially valuable for younger riders developing their technique, as it removes the variable of changing tire pressure from the equation.
The 70/100-19 front mousse allows riders to run effective pressures as low as 8 psi with zero risk of pinch flats. On loose, wet, or sandy terrain this translates to more front-end grip and confidence in corner entry. The foam absorbs impacts that would collapse a tube at low pressure.
Once installed, the front mousse requires no maintenance for the life of the tire. No air pressure checks before practice, no valve stem concerns, no gauges needed. For parents of youth racers and pit bike riders, this simplifies race-day preparation significantly.
Selecting the correct mousse hardness for the front wheel is critical for both performance and safety. The wrong density can cause vague steering or excessive front-end deflection.
| Densità | Pressione effettiva | Miglior terreno | Peso del pilota |
|---|---|---|---|
| Morbido | 8-10 psi | Fango, sabbia, terriccio, condizioni umide | Under 50 kg |
| Medio | 9-11 psi | Terreno misto, uso universale | 50-70 kg |
| Standard | 10-12 psi | Roccioso, duro, desertico, ad alta velocità | Over 70 kg |
This 70/100-19 front mousse insert fits all standard 70/100-19 front tires. This size is commonly found on:
| Fattore | Front Mousse Insert | Front Inner Tube |
|---|---|---|
| Prevenzione piatta | 100% — no front flats possible | Vulnerable to pinch flats, especially on landings |
| Steering precision | Costante per tutta la gara | Cambiamenti con la pressione e la temperatura |
| Manutenzione | Zero - installa e dimentica | Controllare la pressione prima di ogni corsa |
| Massa rotante | Inferiore (senza tubo + blocco del cerchio più leggero) | Più alto |
| Front-end safety | No sudden steering loss | Sudden control loss on front flat |
| Difficoltà di installazione | Moderate — same technique as rear | Più facile |
| Adattabilità al terreno | Fissato dalla scelta della densità | Regolabile tramite pressione |
A 70/100-19 front mousse insert typically lasts between 200 and 500 racing miles, depending on terrain, rider weight, riding speed, and lubrication during installation. Front mousses generally wear more slowly than rear units due to lower heat generation.
Importante: Never use petroleum-based lubricants on mousse inserts — they degrade nitrile rubber. Use only water-based mousse lubricant, especially on front wheel installations where proper seating is critical for safe operation.
| Aspetto | Front Mousse (70/100-19) | Rear Mousse |
|---|---|---|
| Primary Demand | Steering precision & bump absorption | Traction & torque transmission |
| Weight Impact | Critical for steering feel | Critical for acceleration |
| Heat Generation | Lower (less braking/acceleration load) | Higher (driving load) |
| Flat Consequence | Immediate loss of steering control | Loss of drive, manageable |
| Durata di vita tipica | Usually longer than rear | Shorter due to higher loads |
Motobike Mas is a Tianjin, China-based manufacturer of mousse inserts for off-road motorcycle racing tires. We supply dealers, distributors, race teams, and aftermarket brands worldwide with factory-direct pricing and full customization.
| Prezzi di fabbrica | Vendita all'ingrosso diretta, senza intermediari |
| OEM / Etichetta privata | Personalizzazione del marchio, del packaging e dei colori |
| Formulazioni personalizzate | Adjust density and material properties including front-specific formulations |
| MOQ | Contattare per i minimi |
| Spedizione | Mare (FOB Tianjin), trasporto aereo, DDP disponibile |
| Campioni | Campioni di pre-produzione per la valutazione |
The 70/100-19 size is primarily a front wheel application, commonly found on youth motocross bikes (85cc-100cc class), pit bikes, and certain lightweight off-road motorcycles. The narrower 70 mm section width is designed for smaller front-end applications where lighter steering response is needed.
Typically 200-500 racing miles. Front mousses often last longer than rear units because they generate less heat under braking compared to the driving loads on a rear mousse.
Common applications include the Kawasaki KX85/KX100, KTM 85 SX, Husqvarna TC 85, Yamaha YZ85, Suzuki RM85, GasGas MC 85, and many 125cc-155cc pit bikes with 19-inch front wheels.
Yes. Many racers choose a mousse for the front wheel for safety and consistency while running a tube on the rear. However, running mousse on both wheels provides the best overall performance and flat protection.
The basic installation process is the same — the key difference is that proper seating is even more critical on the front wheel because any imbalance or improper seating will be felt through the handlebars as vibration or wobble.
Sì. I clienti B2B possono richiedere campioni da valutare prima di impegnarsi in ordini di volume. Contattate il nostro team commerciale per organizzare la spedizione dei campioni.
I tempi di consegna tipici sono di 15-30 giorni per la produzione OEM standard, a seconda della quantità e dei requisiti di personalizzazione.
