The Motobike Mas 70/100-19 front wheel motorcycle mousse insert is a nitrile rubber foam tire insert for youth MX, pit bikes, and dirt bike front wheels. Available in soft, medium, and standard density. Eliminates front pinch flats, reduces rotating mass. Factory direct B2B wholesale from Tianjin, China.
| 1.1 Bar | Optimum hız performansı |
|---|---|
| 0,8 Bar | Çöller, otlaklar ve gobi arazisi için en iyisi |
| 0,5 Bar | Orman yolları için ideal |
| 0,3 Bar | Teknik arazi sürüşü için ekstrem enduro köpük |
The Motobike Mas 70/100-19 front wheel motorcycle mousse insert is a professional-grade closed-cell nitrile rubber foam tire insert engineered for the front wheels of motocross bikes, pit bikes, youth dirt bikes, and lightweight off-road motorcycles. This front-specific mousse completely replaces the inner tube to eliminate pinch flats on the front end, reduce unsprung rotating mass, and deliver consistent steering precision through every corner.
Available in soft, medium, and standard density formulations, the 70/100-19 front mousse fits smaller-displacement and youth-oriented motorcycles with 19-inch front wheels. As a Tianjin, China-based B2B manufacturer, Motobike Mas offers OEM private labeling, custom hardness formulations, and direct factory wholesale pricing for dealers, distributors, and race teams worldwide.
| Boyut | 70/100-19 |
| Uyum | 70/100-19 front tires (youth MX, pit bike, lightweight off-road) |
| Malzeme | Kapalı hücreli nitril kauçuk köpük |
| Yoğunluk Seçenekleri | Yumuşak, Orta, Standart |
| Ağırlık | Approx. 0.9-1.1 kg |
| Dönen Kütle Azaltma | 40%'ye kadar tüp + ağır hizmet tipi jant kilidi |
| Etkin Basınç Eşdeğeri | 8-12 psi |
| Hizmet Ömrü | Tipik 200-500 yarış mili |
| Menşe Ülke | Tianjin, Çin |
A front tire flat at speed is significantly more dangerous than a rear flat — it causes immediate loss of steering control. The 70/100-19 front mousse insert eliminates this risk entirely. No pinch flats from square-edge landings, no puncture flats from rocks and thorns, and no valve stem failures. For racers on youth bikes and pit bikes, this means safer racing and no DNFs from front-end failures.
Reducing unsprung rotating mass on the front wheel dramatically improves steering response and suspension action. By eliminating the inner tube and allowing a lighter rim lock, the 70/100-19 front mousse reduces front wheel rotating mass by up to 40%. The result: lighter steering feel, reduced deflection off roots and rocks, and better front-end feedback to the rider.
Unlike pneumatic tires where front tire pressure changes with temperature and altitude, a mousse insert delivers consistent damping and steering characteristics from the first lap to the last. This predictability is especially valuable for younger riders developing their technique, as it removes the variable of changing tire pressure from the equation.
The 70/100-19 front mousse allows riders to run effective pressures as low as 8 psi with zero risk of pinch flats. On loose, wet, or sandy terrain this translates to more front-end grip and confidence in corner entry. The foam absorbs impacts that would collapse a tube at low pressure.
Once installed, the front mousse requires no maintenance for the life of the tire. No air pressure checks before practice, no valve stem concerns, no gauges needed. For parents of youth racers and pit bike riders, this simplifies race-day preparation significantly.
Selecting the correct mousse hardness for the front wheel is critical for both performance and safety. The wrong density can cause vague steering or excessive front-end deflection.
| Yoğunluk | Etkili Basınç | En İyi Arazi | Binici Ağırlığı |
|---|---|---|---|
| Yumuşak | 8-10 psi | Mud, sand, loam, wet conditions | Under 50 kg |
| Orta | 9-11 psi | Mixed terrain, all-around use | 50-70 kg |
| Standart | 10-12 psi | Rocky, hard-packed, desert, high-speed | Over 70 kg |
This 70/100-19 front mousse insert fits all standard 70/100-19 front tires. This size is commonly found on:
| Faktör | Front Mousse Insert | Front Inner Tube |
|---|---|---|
| Düz önleme | 100% — no front flats possible | Vulnerable to pinch flats, especially on landings |
| Steering precision | Consistent throughout race | Changes with pressure and temperature |
| Bakım | Sıfır - kur ve unut | Her sürüşten önce basıncı kontrol edin |
| Dönen kütle | Lower (no tube + lighter rim lock) | Daha yüksek |
| Front-end safety | No sudden steering loss | Sudden control loss on front flat |
| Installation difficulty | Moderate — same technique as rear | Daha kolay |
| Terrain adaptability | Fixed by density choice | Adjustable via pressure |
A 70/100-19 front mousse insert typically lasts between 200 and 500 racing miles, depending on terrain, rider weight, riding speed, and lubrication during installation. Front mousses generally wear more slowly than rear units due to lower heat generation.
Önemli: Never use petroleum-based lubricants on mousse inserts — they degrade nitrile rubber. Use only water-based mousse lubricant, especially on front wheel installations where proper seating is critical for safe operation.
| Aspect | Front Mousse (70/100-19) | Rear Mousse |
|---|---|---|
| Primary Demand | Steering precision & bump absorption | Traction & torque transmission |
| Weight Impact | Critical for steering feel | Critical for acceleration |
| Heat Generation | Lower (less braking/acceleration load) | Higher (driving load) |
| Flat Consequence | Immediate loss of steering control | Loss of drive, manageable |
| Tipik Kullanım Ömrü | Usually longer than rear | Shorter due to higher loads |
Motobike Mas, Tianjin, Çin merkezli bir off-road motosiklet yarış lastikleri için köpük ekler üreticisidir. Dünya çapında bayilere, distribütörlere, yarış takımlarına ve satış sonrası markalara fabrika doğrudan fiyatlandırma ve tam özelleştirme ile tedarik sağlıyoruz.
| Fabrika Fiyatlandırması | Doğrudan toptan satış - aracı yok |
| OEM / Özel Etiket | Özel markalama, ambalajlama ve renkler |
| Özel Formülasyonlar | Adjust density and material properties including front-specific formulations |
| ADEDI | Minimumlar için iletişime geçin |
| Nakliye | Deniz (FOB Tianjin), hava taşımacılığı, DDP mevcut |
| Örnekler | Değerlendirme için üretim öncesi numuneler |
The 70/100-19 size is primarily a front wheel application, commonly found on youth motocross bikes (85cc-100cc class), pit bikes, and certain lightweight off-road motorcycles. The narrower 70 mm section width is designed for smaller front-end applications where lighter steering response is needed.
Typically 200-500 racing miles. Front mousses often last longer than rear units because they generate less heat under braking compared to the driving loads on a rear mousse.
Common applications include the Kawasaki KX85/KX100, KTM 85 SX, Husqvarna TC 85, Yamaha YZ85, Suzuki RM85, GasGas MC 85, and many 125cc-155cc pit bikes with 19-inch front wheels.
Yes. Many racers choose a mousse for the front wheel for safety and consistency while running a tube on the rear. However, running mousse on both wheels provides the best overall performance and flat protection.
The basic installation process is the same — the key difference is that proper seating is even more critical on the front wheel because any imbalance or improper seating will be felt through the handlebars as vibration or wobble.
Evet. B2B müşterileri, toplu sipariş vermeden önce değerlendirme için numune talep edebilir. Numune sevkiyatlarını ayarlamak için satış ekibimizle iletişime geçin.
Tipik teslim süresi, miktara ve özelleştirme gereksinimlerine bağlı olarak standart OEM üretimi için 15-30 gündür.
