The Motobike Mas 90/90-21 off-road motorcycle mousse insert is a nitrile rubber foam tire insert for enduro & MX front wheels. Standard fitment for full-size dirt bikes. Eliminates front pinch flats, reduces rotating mass. B2B wholesale from Tianjin, China.
| 1.1 Bar | Optimum hız performansı |
|---|---|
| 0,8 Bar | Çöller, otlaklar ve gobi arazisi için en iyisi |
| 0,5 Bar | Orman yolları için ideal |
| 0,3 Bar | Teknik arazi sürüşü için ekstrem enduro köpük |
The Motobike Mas 90/90-21 off-road motorcycle mousse insert is a professional-grade closed-cell nitrile rubber foam tire insert engineered for the front wheels of enduro, motocross, and off-road motorcycles. The 90/90-21 is the standard front wheel size for virtually all full-size dirt bikes — making this mousse one of the most widely compatible front-end protection solutions in off-road racing.
This front mousse insert completely replaces the inner tube to eliminate dangerous front pinch flats, reduce unsprung rotating mass, and deliver consistent steering precision across the most demanding terrain. Available in soft, medium, and standard density formulations, the 90/90-21 mousse fits all standard full-size dirt bike front wheels.
Tianjin, Çin merkezli bir B2B üreticisi olan Motobike Mas, dünya çapındaki bayiler, distribütörler ve yarış takımları için OEM özel etiketleme, özel sertlik formülasyonları ve doğrudan fabrika toptan satış fiyatları sunmaktadır.
| Boyut | 90/90-21 |
| Uyum | 90/90-21 front tires (standard full-size MX/enduro front wheel) |
| Malzeme | Kapalı hücreli nitril kauçuk köpük |
| Yoğunluk Seçenekleri | Yumuşak, Orta, Standart |
| Ağırlık | Approx. 1.0-1.2 kg |
| Dönen Kütle Azaltma | 40%'ye kadar tüp + ağır hizmet tipi jant kilidi |
| Etkin Basınç Eşdeğeri | 8-12 psi |
| Hizmet Ömrü | Tipik 200-500 yarış mili |
| Menşe Ülke | Tianjin, Çin |
A front tire flat at speed is the most dangerous failure in off-road motorcycling — it causes immediate loss of steering control. The 90/90-21 front mousse eliminates this risk entirely. No pinch flats from square-edge log impacts, no puncture flats from rocks and thorns, no valve stem failures. For enduro racers navigating technical terrain and motocross racers landing heavy jumps, this means no DNFs from front-end failures.
Reducing unsprung rotating mass on the 21-inch front wheel dramatically improves steering response and suspension compliance. By eliminating the inner tube and allowing a lighter rim lock, the 90/90-21 front mousse reduces front wheel rotating mass by up to 40%. The result: lighter steering effort, reduced deflection off roots and rocks, and more precise front-end feedback.
Unlike pneumatic tires where front tire pressure changes with temperature, altitude, and riding time, a mousse insert delivers identical damping and steering characteristics from the first corner to the last. For enduro riders covering varied terrain over hours of racing, this predictability is invaluable for maintaining consistent corner entry speed and line choice.
The 90/90-21 front mousse allows riders to run effective pressures as low as 8 psi with zero risk of pinch flats. On loose over hardpack, wet roots, and sandy sections, this translates to significantly more front-end grip and confidence in corner entry. The foam absorbs square-edge impacts that would instantly collapse a tube at low pressure.
Once installed, the front mousse requires zero maintenance for the life of the tire. No air pressure checks before practice or race starts, no valve stem inspections, no gauges or pumps. For race teams managing multiple bikes and enduro riders preparing for long events, this simplifies preparation and eliminates one more variable.
Selecting the correct mousse hardness for the 90/90-21 front wheel is critical for both performance and safety. The wrong density can cause vague steering, excessive deflection, or premature wear.
| Yoğunluk | Etkili Basınç | En İyi Arazi | Binici Ağırlığı |
|---|---|---|---|
| Yumuşak | 8-10 psi | Mud, sand, wet roots, slippery conditions | Under 70 kg |
| Orta | 9-11 psi | Mixed terrain, enduro, all-around use | 70-90 kg |
| Standart | 10-12 psi | Rocky, hard-packed, desert, high-speed | 90 kg üzeri |
This 90/90-21 mousse insert fits all standard 90/90-21 front tires — the industry-standard front tire size for full-size off-road motorcycles. It is compatible with virtually all full-size dirt bikes from every major manufacturer.
| Faktör | Front Mousse Insert (90/90-21) | Front Inner Tube |
|---|---|---|
| Düz önleme | 100% — no front flats possible | Vulnerable to pinch flats, especially on log impacts |
| Steering precision | Consistent throughout race | Changes with pressure and temperature |
| Bakım | Sıfır - kur ve unut | Her sürüşten önce basıncı kontrol edin |
| Dönen kütle | Lower (no tube + lighter rim lock) | Daha yüksek |
| Safety | No sudden steering loss | Sudden control loss on front flat |
| Kurulum | Moderate difficulty | Daha kolay |
| Terrain adaptability | Fixed by density choice | Adjustable via pressure |
| Reusability | Transfer to new tire (if in good condition) | Replace each tire change |
| Şartname | 90/90-21 | 80/100-21 |
|---|---|---|
| Kesit Genişliği | 90 mm | 80 mm |
| Aspect Ratio | 90% (taller sidewall) | 100% (taller profile overall) |
| Toplam Çap | Slightly larger | Slightly smaller |
| Typical Application | Enduro, trail, off-road | Motocross, supercross |
| Steering Feel | More front-end grip, slightly heavier steering | Lighter steering, faster turn-in |
| En İyi Arazi | Loose, soft, technical enduro | Hard-packed, berms, deep loam |
A 90/90-21 front mousse insert typically lasts between 200 and 500 racing miles, depending on terrain, rider weight, riding speed, and lubrication during installation. Front mousses generally wear more slowly than rear units due to lower heat generation from braking loads compared to the driving loads on a rear wheel.
Önemli: Never use petroleum-based lubricants on mousse inserts — they degrade nitrile rubber. Use only water-based mousse lubricant. Proper seating is especially critical on 21-inch front wheels where any imbalance will be felt through the handlebars at speed.
Motobike Mas, Tianjin, Çin merkezli bir off-road motosiklet yarış lastikleri için köpük ekler üreticisidir. Dünya çapında bayilere, distribütörlere, yarış takımlarına ve satış sonrası markalara fabrika doğrudan fiyatlandırma ve tam özelleştirme ile tedarik sağlıyoruz.
| Fabrika Fiyatlandırması | Doğrudan toptan satış - aracı yok |
| OEM / Özel Etiket | Özel markalama, ambalajlama ve renkler |
| Özel Formülasyonlar | Adjust density and material properties including front-specific formulations |
| ADEDI | Minimumlar için iletişime geçin |
| Nakliye | Deniz (FOB Tianjin), hava taşımacılığı, DDP mevcut |
| Örnekler | Değerlendirme için üretim öncesi numuneler |
90/90-21 is a front wheel tire size — the industry standard front tire for virtually all full-size motocross and enduro motorcycles. The 21-inch diameter rim is universal across 250cc and 450cc dirt bike classes from every major manufacturer.
The 90/90-21 has a 90 mm section width with a 90% aspect ratio, while the 80/100-21 has an 80 mm width with a 100% aspect ratio. The 90/90-21 offers slightly more front-end grip and a slightly larger overall diameter, making it popular for enduro and off-road riding. The 80/100-21 provides lighter steering feel and is more common in motocross.
Typically 200-500 racing miles. Front mousses often last longer than rear units because they generate less heat under braking compared to the driving loads on a rear mousse.
If your motorcycle has a 21-inch front wheel and uses 90/90-21 front tires, this mousse will fit. This covers virtually all full-size motocross and enduro bikes from Honda, Yamaha, Kawasaki, Suzuki, KTM, Husqvarna, GasGas, Beta, Sherco, and more.
Yes. Many enduro and trail riders choose a mousse for the front wheel for safety and consistency while running a tube on the rear. However, running mousse on both wheels provides the best overall performance and flat protection.
Evet. B2B müşterileri, toplu sipariş vermeden önce değerlendirme için numune talep edebilir. Numune sevkiyatlarını ayarlamak için satış ekibimizle iletişime geçin.
Tipik teslim süresi, miktara ve özelleştirme gereksinimlerine bağlı olarak standart OEM üretimi için 15-30 gündür.
