{"id":777,"date":"2026-11-17T02:44:21","date_gmt":"2026-11-17T02:44:21","guid":{"rendered":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/"},"modified":"2026-11-20T07:52:22","modified_gmt":"2026-11-20T07:52:22","slug":"120-90-18-mousse-insert","status":"publish","type":"post","link":"https:\/\/motobikemas.com\/it\/120-90-18-mousse-insert\/","title":{"rendered":"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide"},"content":{"rendered":"<p>The <strong>120\/90-18<\/strong> is an 18 inch rear size with a 120 mm section width, and it exists for a specific reason: it is the rear that stays fitted when the riding changes from motocross to enduro to rally. A 120\/90-18 rear carries the load that compressed air would otherwise carry, so a thorn, a rock edge or a root cannot deflate it, and the tire around it is still inflated with air at the normal tire pressure &mdash; the mousse provides the structure, the air sets the profile, grip and rolling resistance.<\/p>\n<p>Motobike M&aacute;s builds the 120\/90-18 Enduro Motorcycle Mousse Insert (SKU MMO-001) in its own Tianjin factory. It is the wide-profile rally and enduro rear, supplied in four density grades &mdash; 1.1bar, 0.8bar, 0.5bar and 0.3bar &mdash; so the same SKU covers high-speed rally racing, desert and gobi terrain, forest trails and extreme hard enduro. The published compound on this size carries a 120&deg;C heat resistance rating and a 30% lower deformation rate during prolonged riding, which is what makes it a rally part rather than simply a large motocross insert.<\/p>\n<p>This guide covers the specifications, the four density grades and what each is actually for, the terrain each grade suits, the machines the size fits, service life and how distributors order it.<\/p>\n<p><strong>Last updated:<\/strong> 20 November 2026. <strong>Data sources:<\/strong> the published Motobike M&aacute;s specifications for MMO-001 and the factory&#8217;s published fitment, density and lifespan tables. Unit weight for this SKU is published as available on request, and the factory confirms the current figure per order. Figures shown as &ldquo;&asymp;&rdquo; are calculated from the published tyre size designations rather than measured by the factory.<\/p>\n<h2>What is a 120\/90-18 mousse insert?<\/h2>\n<p>A 120\/90-18 is a 120 mm section width on a 90% aspect ratio, giving a 108 mm sidewall and an overall diameter of roughly 673 mm on an 18 inch rim. That combination &mdash; the width of a full-size rear on the smaller of the two rear rim diameters &mdash; is what separates this size from the rest of the range.<\/p>\n<p>An 18 inch rim with a 108 mm sidewall gives a tire that is tall and wide at the same time. The extra diameter compared with a 19 inch rear buys ground clearance and suspension travel for a rock ledge, and the extra width buys traction on a surface that is loose rather than hard. This is the reasoning behind the size&#8217;s fitment: rally and enduro machines that have moved beyond motocross need both, and the tire that gives them both is an 18 inch rim carrying a full-size section width.<\/p>\n<p>What the insert does not do is change the size of the tire. A 120\/90-18 insert is cut for a 120 mm section width on a 90% aspect ratio on an 18 inch rim, and it will not seat correctly in a 110\/90-19 or a 140\/80-18 tire. The full size-by-size compatibility picture is on the <a href=\"https:\/\/motobikemas.com\/mousse-insert-size-guide\/\">mousse insert size guide<\/a>, and the fitting method is in the <a href=\"https:\/\/motobikemas.com\/mousse-insert-installation-guide\/\">mousse insert installation guide<\/a>.<\/p>\n<h2>120\/90-18 technical specifications<\/h2>\n<p>Read off the sidewall, 120\/90-18 means a 120 mm section width, a 90% aspect ratio and an 18 inch rim diameter. The section width is how much rubber the tire puts on the ground; the aspect ratio is how tall the sidewall is as a percentage of that width. On this size the two numbers give a 108 mm sidewall &mdash; the tallest sidewall of any published size except the 140\/80-18 &mdash; and an overall diameter of roughly 673 mm.<\/p>\n<p>That diameter is worth checking against the front of the same machine. A 90\/90-21 front works out at roughly 695 mm and an 80\/100-21 front at roughly 693 mm, so a rally or enduro bike on this rear runs a front about 20&ndash;22 mm taller in overall diameter than its rear. That is a wider front-to-rear gap than a full-size motocross bike carries, and it is a direct consequence of the 18 inch rear &mdash; the same geometry that gives the bike its clearance over a rock ledge.<\/p>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>Published data for this SKU against values confirmed on request<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Data point<\/th>\n<th scope=\"col\">Value<\/th>\n<th scope=\"col\">Status<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Size designation<\/td>\n<td>120\/90-18 &mdash; 120 mm section, 90% aspect ratio, 18 in rim<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>SKU<\/td>\n<td>MMO-001<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Density grades<\/td>\n<td>1.1bar \/ 0.8bar \/ 0.5bar \/ 0.3bar<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Unit weight<\/td>\n<td>Available on request<\/td>\n<td>Available on request<\/td>\n<\/tr>\n<tr>\n<td>Heat resistance rating<\/td>\n<td>Up to 120&deg;C<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Heat resistance improvement<\/td>\n<td>25%<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Impact absorption improvement<\/td>\n<td>18%<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Deformation rate during prolonged riding<\/td>\n<td>30% lower<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Material<\/td>\n<td>High elasticity foam compound<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Rotating mass reduction<\/td>\n<td>Up to 40% against a tube plus a heavy-duty rim lock<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Service life<\/td>\n<td>200&ndash;500 racing miles typical<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Country of origin<\/td>\n<td>Tianjin, China<\/td>\n<td>Published<\/td>\n<\/tr>\n<tr>\n<td>Batch dimensional tolerance<\/td>\n<td>Per production batch<\/td>\n<td>Confirmed on request<\/td>\n<\/tr>\n<tr>\n<td>Current grade naming and terrain guidance<\/td>\n<td>Per SKU<\/td>\n<td>Confirmed on request<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>Overall diameter comparison for the 120\/90-18 and the sizes it is confused with<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Size<\/th>\n<th scope=\"col\">Section width<\/th>\n<th scope=\"col\">Aspect ratio<\/th>\n<th scope=\"col\">Sidewall height<\/th>\n<th scope=\"col\">Rim diameter<\/th>\n<th scope=\"col\">Overall diameter<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>120\/90-18 &mdash; this size<\/td>\n<td>120 mm<\/td>\n<td>90%<\/td>\n<td>&asymp; 108 mm<\/td>\n<td>18 in<\/td>\n<td>&asymp; 673 mm<\/td>\n<\/tr>\n<tr>\n<td>140\/80-18 &mdash; heavy-duty rear<\/td>\n<td>140 mm<\/td>\n<td>80%<\/td>\n<td>&asymp; 112 mm<\/td>\n<td>18 in<\/td>\n<td>&asymp; 681 mm<\/td>\n<\/tr>\n<tr>\n<td>110\/90-19 &mdash; standard MX rear<\/td>\n<td>110 mm<\/td>\n<td>90%<\/td>\n<td>&asymp; 99 mm<\/td>\n<td>19 in<\/td>\n<td>&asymp; 681 mm<\/td>\n<\/tr>\n<tr>\n<td>100\/90-19 &mdash; narrow MX rear<\/td>\n<td>100 mm<\/td>\n<td>90%<\/td>\n<td>90%<\/td>\n<td>19 in<\/td>\n<td>&asymp; 663 mm<\/td>\n<\/tr>\n<tr>\n<td>90\/90-21 &mdash; typical front<\/td>\n<td>90 mm<\/td>\n<td>90%<\/td>\n<td>&asymp; 81 mm<\/td>\n<td>21 in<\/td>\n<td>&asymp; 695 mm<\/td>\n<\/tr>\n<tr>\n<td>80\/100-21 &mdash; MX front<\/td>\n<td>80 mm<\/td>\n<td>100%<\/td>\n<td>&asymp; 80 mm<\/td>\n<td>21 in<\/td>\n<td>&asymp; 693 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The &ldquo;&asymp;&rdquo; values are calculated from the published size designations &mdash; sidewall height is the section width multiplied by the aspect ratio, and overall diameter is the rim diameter plus twice the sidewall height. They are useful for comparing sizes against each other and are not factory-measured figures; the factory confirms measured dimensions on request. The full diameter table for every published size is on the <a href=\"https:\/\/motobikemas.com\/mousse-insert-size-guide\/\">mousse insert size guide<\/a>.<\/p>\n<h2>The four density grades and how to choose between them<\/h2>\n<p>Four density grades are published for the 120\/90-18: 1.1bar (Hard), 0.8bar (Medium Soft), 0.5bar (Soft) and 0.3bar (Ultra Soft). The grade is a measure of how hard the foam itself is, not the pressure you put in the tire; how the bar figure relates to an equivalent tire pressure is explained in full on the <a href=\"https:\/\/motobikemas.com\/mousse-insert-size-guide\/\">mousse insert size guide<\/a>.<\/p>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>Published density grades for the 120\/90-18 mousse insert<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Density grade<\/th>\n<th scope=\"col\">Feel<\/th>\n<th scope=\"col\">Published terrain guidance<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1.1bar<\/td>\n<td>Hard<\/td>\n<td>High-speed rally and racing<\/td>\n<\/tr>\n<tr>\n<td>0.8bar<\/td>\n<td>Medium Soft<\/td>\n<td>Desert, grassland, gobi terrain<\/td>\n<\/tr>\n<tr>\n<td>0.5bar<\/td>\n<td>Soft<\/td>\n<td>Forest trails and technical riding<\/td>\n<\/tr>\n<tr>\n<td>0.3bar<\/td>\n<td>Ultra Soft<\/td>\n<td>Extreme hard enduro and rock terrain<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>What is distinctive about this size is that the four grades are not simply a choice of ride &mdash; they correspond to four genuinely different kinds of riding, and the published terrain guidance on this product maps onto the four competition formats the size is used in:<\/p>\n<ul>\n<li><strong>1.1bar (Hard)<\/strong> &mdash; high-speed rally and racing. This is the grade for a bike doing 150 km\/h on gravel with the engine working, where the foam is carrying a load that is mostly downward and mostly constant.<\/li>\n<li><strong>0.8bar (Medium Soft)<\/strong> &mdash; desert, grassland and gobi terrain. The longest-distance grade, and the one that has to survive heat for hours rather than impacts for minutes.<\/li>\n<li><strong>0.5bar (Soft)<\/strong> &mdash; forest trails and technical riding. Where the ground is uneven and the tire has to conform rather than hold a line.<\/li>\n<li><strong>0.3bar (Ultra Soft)<\/strong> &mdash; extreme hard enduro and rock terrain. The most compliant grade, and the fastest of the four to wear through.<\/li>\n<\/ul>\n<p>That mapping is what makes the range commercially useful rather than merely broad. A distributor stocking one SKU can serve a rally team, an enduro rider, a trail rider and a hard enduro competitor from the same product, and the grade choice is what separates them. The published service life varies accordingly, and the table below breaks that down by operating condition.<\/p>\n<h2>Heat is what ends a rally insert, not distance<\/h2>\n<p>A rally or enduro insert does not usually fail from a puncture or from being cut. It fails from heat, and that is why the published compound on this size is specified differently from the rest of the range.<\/p>\n<p>The published specification for the 120\/90-18 gives a heat resistance rating of up to 120&deg;C, alongside a 25% improvement in heat resistance and a 30% lower deformation rate during prolonged riding. Those three numbers are connected, and the mechanism is worth understanding because it changes how the insert should be used.<\/p>\n<p><strong>Heat comes from the rear, and it comes from the engine.<\/strong> The rear wheel carries drive torque for the whole of the run, and the heat generated in the carcass is converted energy from the same torque that moves the bike forward. A bike doing 150 km\/h on gravel is generating more heat in its rear tire than a motocross bike doing 30 seconds of full throttle, because the heat is proportional to time under load rather than to peak load.<\/p>\n<p><strong>Prolonged heat causes compression set, and compression set is what fails.<\/strong> Foam that is held compressed at temperature for hours does not recover fully when the pressure comes off. The insert gets a permanent flat spot, and the tire around it starts to sit differently. The published improvement in recovery performance after prolonged riding is what keeps this size usable across a multi-stage rally rather than only across a single stage.<\/p>\n<p><strong>Which is why the grade choice is a heat decision as much as a terrain decision.<\/strong> A hard grade resists heat but transmits impacts, and a soft grade absorbs impacts but softens under heat. The published guidance puts 0.8bar on desert, grassland and gobi terrain &mdash; the longest, hottest, most sustained use on this size &mdash; precisely because the compound on this product holds its shape better under heat than the same compound in a firmer or softer setting would.<\/p>\n<p>For an importer this matters commercially, because the heat case is the one where a tube fails most visibly. A tube that loses air on a hot gravel stage is a stage the rider ends. The <a href=\"https:\/\/motobikemas.com\/hard-enduro-vs-desert-racing-mousse-insert\/\">hard enduro versus desert racing comparison<\/a> sets out the terrain side of that, and the <a href=\"https:\/\/motobikemas.com\/how-long-does-motorcycle-mousse-last\/\">published lifespan guide<\/a> covers the temperature and hours-based figures across the range.<\/p>\n<h2>Which machines use a 120\/90-18 rear tire?<\/h2>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>Published applications for the 120\/90-18 mousse insert<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Published application<\/th>\n<th scope=\"col\">What it asks of the insert<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Rally racing<\/td>\n<td>Sustained high-speed load and heat<\/td>\n<\/tr>\n<tr>\n<td>Desert riding<\/td>\n<td>Long hours at temperature in open terrain<\/td>\n<\/tr>\n<tr>\n<td>High-speed gravel riding<\/td>\n<td>Constant load at speed on a hard surface<\/td>\n<\/tr>\n<tr>\n<td>Long-distance enduro stages<\/td>\n<td>Hours of rough terrain at distance<\/td>\n<\/tr>\n<tr>\n<td>Extreme hard enduro competitions<\/td>\n<td>Repeated severe impacts over rock<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Where this size sits among the published rear range is worth stating alongside the applications, because the five rear sizes the factory publishes are not interchangeable stock &mdash; each is cut for one tire and one rim diameter:<\/p>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>The five rear sizes in the published Motobike Mas mousse range<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Size<\/th>\n<th scope=\"col\">SKU<\/th>\n<th scope=\"col\">Position<\/th>\n<th scope=\"col\">Typical use<\/th>\n<th scope=\"col\">Published unit weight<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>110\/90-19<\/td>\n<td>MMO-003<\/td>\n<td>Rear<\/td>\n<td>Standard full-size motocross and enduro rear; the wide-profile rear<\/td>\n<td>1.2&ndash;1.5 kg<\/td>\n<\/tr>\n<tr>\n<td>100\/90-19<\/td>\n<td>MMO-004<\/td>\n<td>Rear<\/td>\n<td>Narrower full-size rear for lighter riders and quicker steering<\/td>\n<td>1.1&ndash;1.4 kg<\/td>\n<\/tr>\n<tr>\n<td>120\/90-18<\/td>\n<td>MMO-001<\/td>\n<td>Rear<\/td>\n<td>Rally, hard enduro and desert rear on an 18 inch rim<\/td>\n<td>Available on request<\/td>\n<\/tr>\n<tr>\n<td>140\/80-18<\/td>\n<td>MMO-002<\/td>\n<td>Rear<\/td>\n<td>Heavy-duty adventure, rally and expedition rear<\/td>\n<td>Available on request<\/td>\n<\/tr>\n<tr>\n<td>90\/100-16<\/td>\n<td>MMO-009<\/td>\n<td>Rear<\/td>\n<td>Youth motocross, mini dirt bike and pit bike rear on a 16 inch rim<\/td>\n<td>0.7&ndash;0.9 kg<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The published application list for this size is worth reading as a set rather than individually, because it covers the formats that sit between motocross and expedition racing:<\/p>\n<ul>\n<li><strong>Rally racing and Dakar-style rally racing<\/strong> &mdash; where the speed and the distance are both high and the insert is under sustained load for hours<\/li>\n<li><strong>Desert riding and desert endurance riding<\/strong> &mdash; the longest heat exposure the insert will see<\/li>\n<li><strong>High-speed gravel riding<\/strong> &mdash; sustained high speed on a hard surface, which is where the hardest grade earns its place<\/li>\n<li><strong>Long-distance enduro stages<\/strong> &mdash; the format that makes the 18 inch rear worth carrying in the first place<\/li>\n<li><strong>Extreme hard enduro competitions<\/strong> &mdash; where the softest grade is the one that works<\/li>\n<li><strong>Adventure expeditions and motocross competitions<\/strong> &mdash; the same tire serving the road between the stages and the stage itself<\/li>\n<\/ul>\n<p>What that list means for a distributor is that this size has the widest application spread of anything the factory publishes. The same SKU covers a bike that spends a weekend in the desert and a bike that spends it in the rocks, and the only variable that changes is which of the four grades is fitted.<\/p>\n<p>For sizing and fitment, the <a href=\"https:\/\/motobikemas.com\/best-motorcycle-mousse-for-enduro-riding\/\">mousse selection guide for enduro riding<\/a> covers how the 120\/90-18 relates to the other rear sizes for a specific terrain, and the <a href=\"https:\/\/motobikemas.com\/140-80-18-mousse-insert\/\">140\/80-18 heavy duty rear<\/a> covers the size that takes over when the machine and its load go up another step.<\/p>\n<h2>How long does a 120\/90-18 mousse last?<\/h2>\n<p>Service life on this size is driven by density, heat and terrain rather than by distance alone, which is why the published figures are quoted in hours. A rally stage covers distance quickly, and a trail day covers it slowly, so two riders on the same insert can see very different lives from it.<\/p>\n<div class=\"mm-table-scroll\">\n<table>\n<caption>Mousse service life by operating condition<\/caption>\n<thead>\n<tr>\n<th scope=\"col\">Condition<\/th>\n<th scope=\"col\">Effect on mousse life<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Optimal internal temperature 40&ndash;85&deg;C<\/td>\n<td>Normal operating window, full performance<\/td>\n<\/tr>\n<tr>\n<td>Above 100&deg;C internal temperature<\/td>\n<td>Foam begins to soften and lose structural integrity &mdash; the fastest way to end a mousse<\/td>\n<\/tr>\n<tr>\n<td>Hard density on rally stages<\/td>\n<td>Replace roughly every 1,000&ndash;1,500 km<\/td>\n<\/tr>\n<tr>\n<td>Sealed and stored at 25&ndash;35&deg;C<\/td>\n<td>2&ndash;3 years before slight hardening<\/td>\n<\/tr>\n<tr>\n<td>Stored unsealed or in direct sunlight<\/td>\n<td>6&ndash;12 months; oxidation and surface cracking begin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The published figures for closed-cell mousse on this size fall between roughly 25 hours in extreme hard enduro and 200 hours for hard-density rally use &mdash; a range that reflects the density choice far more than the riding does. The softest grade is the one that wears through quickly, and the hardest is the one that survives a rally season, and the difference between them is a multiple rather than a percentage.<\/p>\n<p>Actual life on the 120\/90-18 depends on three things: the grade fitted, the heat the rear is put through, and whether the insert is being used for one long rally or a season of enduro stages. The general replacement and storage criteria that apply across every size are covered in <a href=\"https:\/\/motobikemas.com\/mousse-insert-lifespan\/\">mousse insert lifespan<\/a> and <a href=\"https:\/\/motobikemas.com\/how-long-does-motorcycle-mousse-last\/\">how long a motorcycle mousse lasts<\/a>.<\/p>\n<h2>Installing a 120\/90-18 mousse insert<\/h2>\n<p><strong>Never use petroleum-based lubricants on a mousse insert.<\/strong> Petroleum products degrade nitrile rubber, and a degraded insert is a liability, not a saving. Use water-based mousse lubricant only, on both the inside of the tire casing and the insert itself.<\/p>\n<p>The general sequence &mdash; bead seat preparation, lubricant application, first bead, second bead, final seating, and the pressure cycle that sets the profile &mdash; is set out in the <a href=\"https:\/\/motobikemas.com\/mousse-insert-installation-guide\/\">mousse insert installation guide<\/a> and applies unchanged to this size.<\/p>\n<p>One point is worth making specifically about this size. The 18 inch rim is the smaller of the two rear rim diameters in the range, and the tire that goes on it carries a 108 mm sidewall &mdash; so there is a long length of rubber to fold into a comparatively short rim. That combination is where a twisted insert shows up: an insert that went in unevenly will not sit true in the carcass, and the tire will not seat evenly on the bead either. On a size that spends its life on rally and enduro terrain, that is not a cosmetic issue, because the bike is being asked to absorb rock edges continuously.<\/p>\n<p>Check the bead seat is clean and the insert is sitting square before the tire goes on, and inspect the insert at every refit rather than assuming that a tire which was fine at the start of the stage is still fine at the finish.<\/p>\n<h2>How the 120\/90-18 is manufactured and tested<\/h2>\n<p>Motobike M&aacute;s produces mousse in its own Tianjin facility in the Nankai District, covering 50,000 m&sup2; of production floor, warehousing and R&amp;D space. The <a href=\"https:\/\/motobikemas.com\/inside-motobike-mas-smart-manufacturing-facility\/\">full factory walkthrough<\/a> shows the production lines, the storage system and the quality systems behind the range.<\/p>\n<p>Three of the published properties of this size are manufacturing outcomes rather than design intentions, and they are the three that matter to a rally buyer: the 25% improvement in heat resistance, the 18% improvement in impact absorption and the 30% lower deformation rate during prolonged riding. Each one is produced by the foam compound and the density distribution, and each one is verified before an insert leaves the factory.<\/p>\n<p>The inspection regime on this size is density testing, compression recovery testing, heat resistance testing, dimensional inspection and structural integrity verification. Compression recovery is the check that speaks directly to the rally case, because it is the property that determines whether an insert returns to shape after a long stage at temperature. The full process is described in the <a href=\"https:\/\/motobikemas.com\/motorcycle-tire-quality-control-process-x-ray-inspection\/\">quality control process walkthrough<\/a>.<\/p>\n<h2>Ordering from Motobike M&aacute;s: MOQ, lead time, shipping and samples<\/h2>\n<p>The 120\/90-18 is supplied as a made-to-order factory line rather than from finished-goods stock. The terms that apply across the range &mdash; the minimum set per order and confirmed on request, standard OEM production at 15&ndash;30 days depending on quantity and customization, pre-production samples for evaluation, and shipping by sea on FOB Tianjin terms, by air freight or DDP &mdash; are published together on the <a href=\"https:\/\/motobikemas.com\/mousse-insert-size-guide\/\">mousse insert size guide<\/a>, the <a href=\"https:\/\/motobikemas.com\/wholesale-mousse-inserts-guide\/\">wholesale buying guide<\/a> and the <a href=\"https:\/\/motobikemas.com\/mousse-insert-oem-odm-manufacturing\/\">OEM and ODM manufacturing<\/a> pages.<\/p>\n<p>For an importer or distributor, this size is the one where the density mix matters more than the unit count. All four grades come out of the same line and the same tooling, so a customer who takes all four is taking one product with four specifications rather than four products &mdash; and a rally or enduro customer almost always needs more than one, because a hard enduro rider and a rally team want different things from the same tire size.<\/p>\n<p>Private-label production on this SKU includes custom branding, packaging and colours, and the published custom hardness development route is worth raising with a customer who needs a grade that is not exactly one of the four &mdash; a rally team with a specific heat problem is a common case for it. The size also pairs with the <a href=\"https:\/\/motobikemas.com\/140-80-18-mousse-insert\/\">140\/80-18 heavy duty rear<\/a> for expedition work, and the two run on the same line with the same tooling.<\/p>\n<h2>Frequently asked questions about the 120\/90-18 mousse insert<\/h2>\n<h3>What is a 120\/90-18 mousse insert?<\/h3>\n<p>A 120\/90-18 mousse insert is a closed-cell foam tube made to fit a 120\/90-18 off-road motorcycle tire. It replaces the inner tube, carries the load that compressed air would normally carry, and cannot be deflated by a puncture. The tire is still inflated with air at normal tire pressure &mdash; the mousse provides the structure, the air sets the profile and grip. It is a 120 mm section width on a 90% aspect ratio, giving a 108 mm sidewall and an overall diameter of roughly 673 mm on an 18 inch rim, which is what makes it the wide rear that sits on the smaller of the two rear rim diameters.<\/p>\n<h3>Which density grade should I stock for the 120\/90-18?<\/h3>\n<p>Four grades are published for this size and each maps onto a different kind of riding. 1.1bar (Hard) is for high-speed rally and racing, where the foam is carrying a mostly downward and mostly constant load. 0.8bar (Medium Soft) is for desert, grassland and gobi terrain, which is the longest and hottest use on this size. 0.5bar (Soft) is for forest trails and technical riding, where the tire needs to conform rather than hold a line. 0.3bar (Ultra Soft) is for extreme hard enduro and rock terrain, and wears fastest of the four. A distributor can therefore serve a rally team, an enduro rider, a trail rider and a hard enduro competitor from one SKU.<\/p>\n<h3>Does the bar number mean I inflate the tire to that pressure?<\/h3>\n<p>No, and this is the most misunderstood specification in the whole mousse category. The bar figure is a density-equivalent rating that describes how hard the foam itself is. It is not the pressure you put in the tire. The tire is still inflated with air at the bike&#8217;s normal off-road pressure, the mousse carries the structural load, and the air sets the profile and the contact patch. Reading 1.1bar as 11 psi and inflating the tire to it is how a buyer ends up with a tire that is far too hard for the terrain and a ride that is far too harsh.<\/p>\n<h3>How long does a 120\/90-18 mousse last?<\/h3>\n<p>Published figures for closed-cell mousse on this size fall between roughly 25 hours in extreme hard enduro and 200 hours for hard-density rally use. Service life here is driven by density, heat and terrain rather than by distance alone, which is why the figures are quoted in hours &mdash; a rally stage covers distance quickly and a trail day covers it slowly, so two riders on the same insert can see very different lives from it. The published life varies with the grade fitted, with the softest grade wearing through fastest.<\/p>\n<h3>Can a mousse be reused after a puncture?<\/h3>\n<p>A serviceable insert can be transferred to a new tire of the same size, so a tire that shreds on a rock ledge does not also mean a new insert. What ends an insert&#8217;s life is usually compression set rather than a puncture, and on this size in particular heat is the main driver &mdash; the published compound carries a 120 degree Celsius heat resistance rating and a 30% lower deformation rate during prolonged riding for exactly that reason. Inspect a used insert for a permanent flat spot rather than simply refitting it.<\/p>\n<h3>How should mousse be stored before it is sold on?<\/h3>\n<p>Cool, dry, out of direct sunlight, never compressed or folded, and kept away from ozone sources such as electric motors and welding equipment. A batch held in a hot warehouse or shipped in a hot container loses shelf life quickly, which matters on this size in particular because heat is what degrades it. Stock rotation is worth raising with a distributor who is holding the four density grades for a rally season rather than selling them through in a season.<\/p>\n<h3>What is the minimum order quantity and lead time?<\/h3>\n<p>The minimum for the 120\/90-18 is set per order and confirmed by the factory on request, because the range is made to order rather than pulled from finished-goods stock. Standard OEM production typically runs 15 to 30 days depending on quantity and customization, pre-production samples are available for evaluation before a bulk order, and shipping is by sea on FOB Tianjin terms, by air freight or DDP. Because all four density grades come out of one line with the same tooling, taking more than one grade is taking one product with four specifications rather than four products.<\/p>\n<h3>Do Motobike Mas mousse inserts carry certification?<\/h3>\n<p>Motobike Mas manufactures tires and mousse inserts under ISO 9001:2015 quality management, to DOT and ECE production standards. Every insert also passes density testing, compression recovery testing, heat resistance testing, dimensional inspection and structural integrity verification before packing. On this size the compression recovery check carries particular weight, because it is the property that determines whether an insert returns to shape after a long stage at temperature. The certification documentation is on the motorcycle tire certifications page and the inspection regime in the quality control walkthrough.<\/p>\n<h3>Can I order private label or a custom hardness for the 120\/90-18?<\/h3>\n<p>Yes. Private-label production on this SKU includes custom branding, packaging and colours, and the factory publishes a custom hardness development route. That second option is worth raising with a rally team that has a specific heat or impact problem, because the four published grades are a general framework rather than a fixed list. A distributor combining the 120\/90-18 with the 140\/80-18 for expedition work can combine both sizes on one purchase order, since they run on the same production line with the same tooling.<\/p>\n<h2>Order the 120\/90-18 enduro mousse insert<\/h2>\n<p>The 120\/90-18 Enduro Motorcycle Mousse Insert (SKU MMO-001) is produced on the Motobike M&aacute;s line in Tianjin and supplied to importers, distributors, dealers, race teams and aftermarket brands worldwide. It is available in 1.1bar, 0.8bar, 0.5bar and 0.3bar densities, with a published heat resistance rating of up to 120&deg;C and a 30% lower deformation rate during prolonged riding. Unit weight for this SKU is published as available on request.<\/p>\n<p>Ask for the current minimum, the density mix and the lead time on the 120\/90-18, or take a set of pre-production samples before placing a bulk order. Because all four grades come from one line, a customer taking more than one of them is taking one product with four specifications rather than four products &mdash; and private-label production with custom branding, packaging and colours is available on this SKU, along with custom hardness development for accounts with a specific heat or impact requirement.<\/p>\n<p>The <a href=\"https:\/\/motobikemas.com\/product\/120-90-18-enduro-motorcycle-mousse-insert\/\">120\/90-18 product page<\/a> carries the full specification and <a href=\"https:\/\/motobikemas.com\/contact\/\">the factory contact page<\/a> takes specification requests directly. Importers building a rear range should read the <a href=\"https:\/\/motobikemas.com\/mousse-insert-size-guide\/\">mousse insert size guide<\/a> for the full size and grade comparison, the <a href=\"https:\/\/motobikemas.com\/hard-enduro-vs-desert-racing-mousse-insert\/\">hard enduro versus desert racing comparison<\/a> for the terrain logic behind the grade choice, and the <a href=\"https:\/\/motobikemas.com\/motorcycle-tire-certifications-iso-9001-dot-ece\/\">ISO 9001, DOT and ECE certification documentation<\/a> for the file a distributor needs.<\/p>\n<p><script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is a 120\/90-18 mousse insert?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A 120\/90-18 mousse insert is a closed-cell foam tube made to fit a 120\/90-18 off-road motorcycle tire. It replaces the inner tube, carries the load that compressed air would normally carry, and cannot be deflated by a puncture. The tire is still inflated with air at normal tire pressure &mdash; the mousse provides the structure, the air sets the profile and grip. It is a 120 mm section width on a 90% aspect ratio, giving a 108 mm sidewall and an overall diameter of roughly 673 mm on an 18 inch rim, which is what makes it the wide rear that sits on the smaller of the two rear rim diameters.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which density grade should I stock for the 120\/90-18?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Four grades are published for this size and each maps onto a different kind of riding. 1.1bar (Hard) is for high-speed rally and racing, where the foam is carrying a mostly downward and mostly constant load. 0.8bar (Medium Soft) is for desert, grassland and gobi terrain, which is the longest and hottest use on this size. 0.5bar (Soft) is for forest trails and technical riding, where the tire needs to conform rather than hold a line. 0.3bar (Ultra Soft) is for extreme hard enduro and rock terrain, and wears fastest of the four. A distributor can therefore serve a rally team, an enduro rider, a trail rider and a hard enduro competitor from one SKU.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the bar number mean I inflate the tire to that pressure?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No, and this is the most misunderstood specification in the whole mousse category. The bar figure is a density-equivalent rating that describes how hard the foam itself is. It is not the pressure you put in the tire. The tire is still inflated with air at the bike's normal off-road pressure, the mousse carries the structural load, and the air sets the profile and the contact patch. Reading 1.1bar as 11 psi and inflating the tire to it is how a buyer ends up with a tire that is far too hard for the terrain and a ride that is far too harsh.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long does a 120\/90-18 mousse last?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Published figures for closed-cell mousse on this size fall between roughly 25 hours in extreme hard enduro and 200 hours for hard-density rally use. Service life here is driven by density, heat and terrain rather than by distance alone, which is why the figures are quoted in hours &mdash; a rally stage covers distance quickly and a trail day covers it slowly, so two riders on the same insert can see very different lives from it. The published life varies with the grade fitted, with the softest grade wearing through fastest.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can a mousse be reused after a puncture?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A serviceable insert can be transferred to a new tire of the same size, so a tire that shreds on a rock ledge does not also mean a new insert. What ends an insert's life is usually compression set rather than a puncture, and on this size in particular heat is the main driver &mdash; the published compound carries a 120 degree Celsius heat resistance rating and a 30% lower deformation rate during prolonged riding for exactly that reason. Inspect a used insert for a permanent flat spot rather than simply refitting it.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How should mousse be stored before it is sold on?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Cool, dry, out of direct sunlight, never compressed or folded, and kept away from ozone sources such as electric motors and welding equipment. A batch held in a hot warehouse or shipped in a hot container loses shelf life quickly, which matters on this size in particular because heat is what degrades it. Stock rotation is worth raising with a distributor who is holding the four density grades for a rally season rather than selling them through in a season.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the minimum order quantity and lead time?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The minimum for the 120\/90-18 is set per order and confirmed by the factory on request, because the range is made to order rather than pulled from finished-goods stock. Standard OEM production typically runs 15 to 30 days depending on quantity and customization, pre-production samples are available for evaluation before a bulk order, and shipping is by sea on FOB Tianjin terms, by air freight or DDP. Because all four density grades come out of one line with the same tooling, taking more than one grade is taking one product with four specifications rather than four products.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do Motobike Mas mousse inserts carry certification?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Motobike Mas manufactures tires and mousse inserts under ISO 9001:2015 quality management, to DOT and ECE production standards. Every insert also passes density testing, compression recovery testing, heat resistance testing, dimensional inspection and structural integrity verification before packing. On this size the compression recovery check carries particular weight, because it is the property that determines whether an insert returns to shape after a long stage at temperature. The certification documentation is on the motorcycle tire certifications page and the inspection regime in the quality control walkthrough.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I order private label or a custom hardness for the 120\/90-18?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Private-label production on this SKU includes custom branding, packaging and colours, and the factory publishes a custom hardness development route. That second option is worth raising with a rally team that has a specific heat or impact problem, because the four published grades are a general framework rather than a fixed list. A distributor combining the 120\/90-18 with the 140\/80-18 for expedition work can combine both sizes on one purchase order, since they run on the same production line with the same tooling.\"\n      }\n    }\n  ]\n}\n<\/script><\/p>\n<style id=\"mm-table-style-777\">\n.mm-table-scroll{overflow-x:auto;-webkit-overflow-scrolling:touch;margin:26px 0;border:1px solid #e2e8f0;border-top:3px solid #fcd444;border-radius:12px;background:#fff}\n.mm-table-scroll table{width:100%;min-width:620px;border-collapse:collapse;margin:0;font-size:15px;line-height:1.6}\n.mm-table-scroll caption{position:sticky;left:0;caption-side:top;padding:12px 18px;font-size:13px;font-weight:700;letter-spacing:.02em;text-align:left;color:#0f172a;background:#fff}\n.mm-table-scroll thead th{background:#172033;color:#fff;font-weight:600;text-align:left;padding:14px 18px;white-space:nowrap;border:0}\n.mm-table-scroll tbody td{padding:14px 18px;border-top:1px solid #eef2f6;vertical-align:top}\n.mm-table-scroll tbody tr:nth-child(even){background:#f8fafc}\n.mm-table-scroll tbody tr:hover{background:#f1f5f9}\n.mm-table-scroll tbody td:first-child{font-weight:600;color:#0f172a}\n@media (max-width:767px){.mm-table-scroll{border-radius:10px}.mm-table-scroll table{min-width:620px;font-size:14px}.mm-table-scroll caption{padding:10px 14px;width:calc(100vw - 62px);max-width:calc(100vw - 62px);white-space:normal}.mm-table-scroll thead th,.mm-table-scroll tbody td{padding:12px 14px}}\n<\/style>\n","protected":false},"excerpt":{"rendered":"<p>120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.<\/p>","protected":false},"author":1,"featured_media":600,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_breakdance_hide_in_design_set":false,"_breakdance_tags":"","footnotes":""},"categories":[187],"tags":[300,301,304,295,297,296,303,302,265,299,305,298,306],"class_list":["post-777","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-mousse-guides","tag-120-90-18","tag-120-90-18-mousse","tag-18-inch-mousse","tag-enduro-mousse","tag-hard-enduro","tag-motorcycle-mousse","tag-mousse-density","tag-mousse-hardness","tag-mousse-insert-oem","tag-mousse-inserts","tag-off-road-mousse","tag-rally-mousse","tag-rally-racing"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v25.1 (Yoast SEO v25.1) - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>120\/90-18 Mousse Insert | Enduro &amp; Rally Fitment Guide<\/title>\n<meta name=\"description\" content=\"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/motobikemas.com\/it\/120-90-18-mousse-insert\/\" \/>\n<meta property=\"og:locale\" content=\"it_IT\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide\" \/>\n<meta property=\"og:description\" content=\"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/motobikemas.com\/it\/120-90-18-mousse-insert\/\" \/>\n<meta property=\"og:site_name\" content=\"Motobike M\u00e1s\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/motobikemas\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-17T02:44:21+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-20T07:52:22+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1678\" \/>\n\t<meta property=\"og:image:height\" content=\"794\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Leo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Scritto da\" \/>\n\t<meta name=\"twitter:data1\" content=\"Leo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tempo di lettura stimato\" \/>\n\t<meta name=\"twitter:data2\" content=\"21 minuti\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/\"},\"author\":{\"name\":\"Leo\",\"@id\":\"https:\/\/motobikemas.com\/#\/schema\/person\/b2dc0ad07f92acec21c69f163187fd95\"},\"headline\":\"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide\",\"datePublished\":\"2026-11-17T02:44:21+00:00\",\"dateModified\":\"2026-11-20T07:52:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/\"},\"wordCount\":4205,\"commentCount\":2,\"publisher\":{\"@id\":\"https:\/\/motobikemas.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg\",\"keywords\":[\"120\/90-18\",\"120\/90-18 mousse\",\"18 inch mousse\",\"enduro mousse\",\"hard enduro\",\"motorcycle mousse\",\"mousse density\",\"mousse hardness\",\"mousse insert OEM\",\"mousse inserts\",\"off road mousse\",\"rally mousse\",\"rally racing\"],\"articleSection\":[\"Mousse Guides\"],\"inLanguage\":\"it-IT\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#respond\"]}],\"description\":\"Compare the best enduro mousse options for hardness, heat resistance, rally racing, and extreme enduro. Technical guide for purchasing managers with density specifications and temperature data.\",\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\".entry-content h2\",\".entry-content h3\",\".entry-content p\",\".entry-content table\"]}},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/\",\"url\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/\",\"name\":\"120\/90-18 Mousse Insert | Enduro & Rally Fitment Guide\",\"isPartOf\":{\"@id\":\"https:\/\/motobikemas.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg\",\"datePublished\":\"2026-11-17T02:44:21+00:00\",\"dateModified\":\"2026-11-20T07:52:22+00:00\",\"description\":\"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.\",\"breadcrumb\":{\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#breadcrumb\"},\"inLanguage\":\"it-IT\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"it-IT\",\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage\",\"url\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg\",\"contentUrl\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg\",\"width\":1678,\"height\":794,\"caption\":\"120\/90-18 enduro motorcycle mousse insert for rally and off road racing\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/motobikemas.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide\",\"item\":\"https:\/\/motobikemas.com\/it\/it\/wp-json\/wp\/v2\/posts\/777\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/motobikemas.com\/#website\",\"url\":\"https:\/\/motobikemas.com\/\",\"name\":\"Motobike M\u00e1s\",\"description\":\"Premium Mousse Tires &amp; Motorcycle Tires Manufacturer\",\"publisher\":{\"@id\":\"https:\/\/motobikemas.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/motobikemas.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"it-IT\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/motobikemas.com\/#organization\",\"name\":\"Motobike M\u00e1s\",\"url\":\"https:\/\/motobikemas.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"it-IT\",\"@id\":\"https:\/\/motobikemas.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/logo-2.png\",\"contentUrl\":\"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/logo-2.png\",\"width\":1773,\"height\":1086,\"caption\":\"Motobike M\u00e1s\"},\"image\":{\"@id\":\"https:\/\/motobikemas.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/motobikemas\",\"https:\/\/www.linkedin.com\/company\/motobikem%c3%a1s\/\"],\"contactPoint\":{\"@type\":\"ContactPoint\",\"telephone\":\"+86-22-1234-5678\",\"contactType\":\"sales\",\"availableLanguage\":[\"English\",\"Chinese\"]},\"address\":{\"@type\":\"PostalAddress\",\"streetAddress\":\"Room 303, Building 2, No. 11 Xihu Road, Nankai District\",\"addressLocality\":\"Tianjin\",\"addressCountry\":\"CN\"},\"description\":\"Premium Mousse Tires & Motorcycle Tires Manufacturer servicing wholesale, OEM, and ODM clients globally.\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/motobikemas.com\/#\/schema\/person\/b2dc0ad07f92acec21c69f163187fd95\",\"name\":\"Leo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"it-IT\",\"@id\":\"https:\/\/motobikemas.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/47ba7ecfac9c8459fafecb213e38fb0063318853edd4d92f5c6d3cc6891ad2fc?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/47ba7ecfac9c8459fafecb213e38fb0063318853edd4d92f5c6d3cc6891ad2fc?s=96&d=mm&r=g\",\"caption\":\"Leo\"},\"description\":\"Leo is a motorcycle tire and mousse specialist with over 8 years of experience in off-road tire technology, foam compounding, and enduro product development at Motobike M\u00e1s.\",\"sameAs\":[],\"url\":\"https:\/\/motobikemas.com\/it\/author\/leo\/\",\"jobTitle\":\"Product Manager, Motobike M\u00e1s\",\"worksFor\":{\"@id\":\"https:\/\/motobikemas.com\/#organization\"},\"knowsAbout\":[\"Motorcycle mousse inserts\",\"Enduro riding\",\"Off-road tire technology\",\"Motorsports equipment\",\"Rubber compounding\",\"Extreme enduro\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"120\/90-18 Mousse Insert | Enduro & Rally Fitment Guide","description":"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/motobikemas.com\/it\/120-90-18-mousse-insert\/","og_locale":"it_IT","og_type":"article","og_title":"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide","og_description":"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.","og_url":"https:\/\/motobikemas.com\/it\/120-90-18-mousse-insert\/","og_site_name":"Motobike M\u00e1s","article_publisher":"https:\/\/www.facebook.com\/motobikemas","article_published_time":"2026-11-17T02:44:21+00:00","article_modified_time":"2026-11-20T07:52:22+00:00","og_image":[{"width":1678,"height":794,"url":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg","type":"image\/jpeg"}],"author":"Leo","twitter_card":"summary_large_image","twitter_misc":{"Scritto da":"Leo","Tempo di lettura stimato":"21 minuti"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#article","isPartOf":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/"},"author":{"name":"Leo","@id":"https:\/\/motobikemas.com\/#\/schema\/person\/b2dc0ad07f92acec21c69f163187fd95"},"headline":"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide","datePublished":"2026-11-17T02:44:21+00:00","dateModified":"2026-11-20T07:52:22+00:00","mainEntityOfPage":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/"},"wordCount":4205,"commentCount":2,"publisher":{"@id":"https:\/\/motobikemas.com\/#organization"},"image":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage"},"thumbnailUrl":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg","keywords":["120\/90-18","120\/90-18 mousse","18 inch mousse","enduro mousse","hard enduro","motorcycle mousse","mousse density","mousse hardness","mousse insert OEM","mousse inserts","off road mousse","rally mousse","rally racing"],"articleSection":["Mousse Guides"],"inLanguage":"it-IT","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#respond"]}],"description":"Confrontate le migliori mousse da enduro per durezza, resistenza al calore, gare di rally ed enduro estremo. Guida tecnica per i responsabili degli acquisti con specifiche di densit\u00e0 e dati sulla temperatura.","speakable":{"@type":"SpeakableSpecification","cssSelector":[".entry-content h2",".entry-content h3",".entry-content p",".entry-content table"]}},{"@type":"WebPage","@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/","url":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/","name":"120\/90-18 Mousse Insert | Enduro & Rally Fitment Guide","isPartOf":{"@id":"https:\/\/motobikemas.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage"},"image":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage"},"thumbnailUrl":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg","datePublished":"2026-11-17T02:44:21+00:00","dateModified":"2026-11-20T07:52:22+00:00","description":"120\/90-18 mousse insert for enduro, rally and hard enduro. Compare 1.1, 0.8, 0.5 and 0.3 bar density grades, fitment, lifespan, MOQ and factory lead time.","breadcrumb":{"@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#breadcrumb"},"inLanguage":"it-IT","potentialAction":[{"@type":"ReadAction","target":["https:\/\/motobikemas.com\/120-90-18-mousse-insert\/"]}]},{"@type":"ImageObject","inLanguage":"it-IT","@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#primaryimage","url":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg","contentUrl":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/120-90-18-enduro-motorcycle-mousse.jpg","width":1678,"height":794,"caption":"120\/90-18 enduro motorcycle mousse insert for rally and off road racing"},{"@type":"BreadcrumbList","@id":"https:\/\/motobikemas.com\/120-90-18-mousse-insert\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/motobikemas.com\/"},{"@type":"ListItem","position":2,"name":"120\/90-18 Mousse Insert: Enduro and Rally Fitment Guide","item":"https:\/\/motobikemas.com\/it\/it\/wp-json\/wp\/v2\/posts\/777"}]},{"@type":"WebSite","@id":"https:\/\/motobikemas.com\/#website","url":"https:\/\/motobikemas.com\/","name":"Motobike M\u00e1s","description":"Pneumatici Premium Mousse e pneumatici per moto Produttore di pneumatici Premium Mousse e pneumatici per moto","publisher":{"@id":"https:\/\/motobikemas.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/motobikemas.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"it-IT"},{"@type":"Organization","@id":"https:\/\/motobikemas.com\/#organization","name":"Motobike M\u00e1s","url":"https:\/\/motobikemas.com\/","logo":{"@type":"ImageObject","inLanguage":"it-IT","@id":"https:\/\/motobikemas.com\/#\/schema\/logo\/image\/","url":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/logo-2.png","contentUrl":"https:\/\/motobikemas.com\/wp-content\/uploads\/2026\/05\/logo-2.png","width":1773,"height":1086,"caption":"Motobike M\u00e1s"},"image":{"@id":"https:\/\/motobikemas.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/motobikemas","https:\/\/www.linkedin.com\/company\/motobikem%c3%a1s\/"],"contactPoint":{"@type":"ContactPoint","telephone":"+86-22-1234-5678","contactType":"sales","availableLanguage":["English","Chinese"]},"address":{"@type":"PostalAddress","streetAddress":"Room 303, Building 2, No. 11 Xihu Road, Nankai District","addressLocality":"Tianjin","addressCountry":"CN"},"description":"Produttori di pneumatici per mousse e motocicli di qualit\u00e0 superiore, al servizio di clienti all'ingrosso, OEM e ODM in tutto il mondo."},{"@type":"Person","@id":"https:\/\/motobikemas.com\/#\/schema\/person\/b2dc0ad07f92acec21c69f163187fd95","name":"Leone","image":{"@type":"ImageObject","inLanguage":"it-IT","@id":"https:\/\/motobikemas.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/47ba7ecfac9c8459fafecb213e38fb0063318853edd4d92f5c6d3cc6891ad2fc?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/47ba7ecfac9c8459fafecb213e38fb0063318853edd4d92f5c6d3cc6891ad2fc?s=96&d=mm&r=g","caption":"Leo"},"description":"Leo \u00e8 uno specialista di pneumatici e mousse per moto con oltre 8 anni di esperienza nella tecnologia dei pneumatici off-road, nella mescola delle schiume e nello sviluppo di prodotti enduro presso Motobike M\u00e1s.","sameAs":[],"url":"https:\/\/motobikemas.com\/it\/author\/leo\/","jobTitle":"Product Manager, Motobike M\u00e1s","worksFor":{"@id":"https:\/\/motobikemas.com\/#organization"},"knowsAbout":["Motorcycle mousse inserts","Enduro riding","Off-road tire technology","Motorsports equipment","Rubber compounding","Extreme enduro"]}]}},"_links":{"self":[{"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/posts\/777","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/comments?post=777"}],"version-history":[{"count":6,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/posts\/777\/revisions"}],"predecessor-version":[{"id":864,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/posts\/777\/revisions\/864"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/media\/600"}],"wp:attachment":[{"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/media?parent=777"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/categories?post=777"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/motobikemas.com\/it\/wp-json\/wp\/v2\/tags?post=777"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}